loader image
BabyPod 20 infant transport incubator logo

pNeuton mini NEO


Neonatal critical life support ventilation and CPAP when and where it’s needed.


The pNeuton mini NEO is the only fully pneumatic, portable ventilator for neonates with CPAP, oxygen mixing, and patient alarms. The mini NEO is a small, lightweight ventilator with precise timing and pressure controls designed for use on patients from 400 grams to 20 kilograms.

With a broad range of clinical applications, the pNeuton mini NEO provides immediate life support for at-risk deliveries, MRI and other radiology suites, and short or long term ventilation needs – even tandem therapy with high-frequency jet ventilation.

The pNeuton mini NEO is also a safe and secure way for neonatology to transport patients inside the hospital, as well as via air or ground.

The mini NEO is also MRI compatible allowing for image production with no artifact. The ventilator can be placed next to the MRI magnet with no Gauss line restriction, and a remote alarm can be added to enhance patient safety.



  • Fully pneumatic – No batteries or electricity needed
  • Invasive or non-invasive ventilation
  • Built-in oxygen blender, and precise timing & pressure controlsIdeal for air, ground, or intra-hospital transport
  • MRI compatible up to 3T – can be placed next to the magnet with remote alarm
  • Small, lightweight, portable
  • Easy-to-use controls
  • Made in Melbourne, Florida, USA


  • One ventilator for transport and MRI/diagnostic procedures provides stability and safety with no change in patient circuit required
  • Switch from CPAP nasal prongs/face mask to mechanical ventilation seamlessly and without interruption
  • A choice of continuous flow settings to provide the right ventilation for the size of your patient with the least amount of expiratory flow resistance
  • Adjustable oxygen delivery from 21% to 100% to precisely match patient oxygen requirements
Benefits for You, the Healthcare Provider
  • Night visible manometer to monitor patient pressure and effort
  • Calibrated controls for precise and easy operation
  • MRI conditional up to 3 T – with no gauss line magnet separation restrictions and an optional remote alarm output for the control room
  • Patient disconnect and high-pressure alarms that work during non-invasive and invasive ventilation
  • Rugged and tested to meet airworthiness standards
  • Oxygen/air powered – no electrical connection or batteries
  • Protection for the caregiver from patient exhalation using the bacteria / viral filter
Benefits for your Budget
  • Lightweight and portable with mounting bracket to any patient care incubator/bed
  • Switch from invasive ventilatory support to non-invasive with just a simple change of the patient interface
  • No batteries or electronics decrease preventative maintenance costs
  • Minimal oxygen consumption to maximize transport times


pNeuton mini Ventilator is designed for

  • A&E
  • MRI
  • OR
  • NICU
  • Air, ground, or Intra-hospital transport

Product Information for the pNeuton mini NEO Ventilator



  • Pneumatically powered for use on neonates and infants
  • Patient range: 400 gram to 20 kilogram
  • Modes: CMV, IMV + CPAP or CPAP only – continuous flow pressure limited ventilation
  • miniFlow Patient Interface supports nasal prong/mask application
  • Pressures displayed on manometer
  • MRI conditional: static magnetic field of 3 T or less, maximum spatial gradient magnetic field of 720-gauss/cm or less, no gauss line restriction
  • Gas consumption: flow setting + 3 L/min oxygen
  • Weight: 4 kg
  • Dimensions: 15.2 cm x 22.1 cm x 19.8 cm
  • Input gas requirement (oxygen and medical air): 55 psi ± 15 psi (3.8 bar ± 1 bar) each gas
  • Meets International Standards for transport ventilators:
    • ASTM F1100-90 – Ventilators Intended for Use in Critical Care
    • ISO 10651-3:1997 – Lung Ventilators For Medical Use – Particular requirements for emergency and transport ventilators
    • Airworthiness: RTCA DO-160G – Environmental Conditions and Test Procedures for Airborne Equipment, as applicable


Inspiratory time: 0.25 to 0.8 seconds
Expiratory time: 0.25 to 6 seconds
Continuous Flow: 6, 8, or 10 L/min
Peak pressure: 15 to 40 cm H2O (mbar)
PEEP / CPAP: 0 to 20 cm H2O (mbar)
Oxygen: 21 to 100% ± 3%, requires oxygen and medical air source


  • All pneumatic alarm system (no batteries – requires minimum 30 psi / 2 bar gas supply pressure)
  • Remote alarm output connection
  • Patient circuit disconnection
    • Automatic reset when alarm condition resolves
    • 10-second response, 25-second silence/reset button
    • Pressure: less than 3 cm H2O
  • High pressure – independently adjustable from Peak Pressure
  • Low gas source pressure
    • If either source gas drops below 40 psi (2.8 bar)
    • Continues operation as long as oxygen is available
Regulatory Compliance
International Regulatory Compliance Information

Under regulatory compliance, our goal is to take steps to comply with relevant laws, policies, and regulations for medical device manufacturing and marketing Airon products. All Airon products are designed, manufactured, and supported based upon sound quality procedures. Every device is CE marked as well as USA FDA cleared.

Product Certification and Approvals

USA – FDA Free Sale Certificate – Certificate to Foreign Government

<>Canada – Medical Device Licenses
pNeuton ventilator license | patient circuit license

Europe – CE Marking certificates – Airon EC Certificate

Europe – Declarations of Conformity

USA –FDA 510(k) cleared
 pNeuton mini

User Resources

pNeuton mini NEO Sales Sheet: English

pNeuton mini NEO Operational Verification Procedure: English

pNeuton mini NEO Operator’s Manual English

Product Comparison Chart: English

Preventative Maintenance Program: English

Technical Bulletins
MRI Certification pNeuton Ventilators: English

Compliance with US Army Airworthiness Standards: English

pNeuton Bi-level Pressure Ventilation: English

Work of Breathing Comparison: English

Respiratory Care Test Comparison: English

pNeuton for disaster preparation: English

pNeuton mini Manual Breaths with Bunnell Jet: English

NBC filter with pNeuton ventilators: English

pNeuton for disaster preparation: English

Airon Product catalog

The pNeuton ventilators/CPAP systems are critical care devices designed for use by healthcare professionals under the direction of a physician or healthcare provider.


Airon Corporation manufactures and markets innovative, reliable, effective, fully pneumatic oxygen-powered life support ventilation and CPAP products and accessories for healthcare workers worldwide. Our products support neonates, infants, pediatrics, children and adult patients in EMS, hospital A&E and trauma, MRI, OR, ICU, and transport. 

Get in touch!

For more information, to arrange a demo or to ask any questions about our products, please contact us.